Home > Turning gears > Turning Lathes Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Model:
  • Vturn 46
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:

DESCRIPTION

Genuine 60° slant bed for minimum distance from Z-axis ballscrew to the tool tip so as to reduce the chip build-up. Built-in 4-step gearbox inside the headstock further enhances the cutting torque 536.4kg-m at low spindle speed 67 rpm. Spindle nose A2-11 with hydraulic 15″ chuck is offered as standard and available with 18″/21″/24″ chucks. Z-axis ballscrew diameter 50mm. Maximum turning length 1650mm. Available with C-axis spindle and live tooling by Victor’s own VDI turret.
+ request more information

SEND ENQUIRY

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

You may also be interested in these Machines

    •
      Manufacturer:
      Model:
      Vturn NP20
      Description:
      Machine width 1.93 metres Turning length 400 mm Available with BMT Live Tooling and C-axis as an option Rapid feeds 30/30 m/min Roller guideways Servo turret One-piece slant bed Rear/Right chip disposal Option for unmanned operation – requires a ro...

      More Info

    • Manufacturer:
      XYZ
      Model:
      XYZ 1340 Trainer Lathe (2006) *POA*
      Description:
      Max’ Distance Between Centres 1000mm Max Swing over Bed 330mm Max’ Swing over Gap 495mm Spindle Bore 35mm Spindle Speeds 53 – 2000 rev/min Spindle Motor 3hp Quick Change Tool Post Tailstock MT3 Tailstock Dia’ 40mm Tailstock Travel 110mm Manuf...

      More Info

    • Manufacturer:
      Model:
      Vturn 40 / 220
      Description:
      Heavy cutting lathe with spindle nose A2-11 for turning length from 1250mm to 4250mm. Bar capacity 91mm, Spindle speed 2500rpm. Single piece cast slant bed (45-degree) for minimum distance from ball screw to the tool tip Spindle bore A2-11 with hydra...

      More Info

    • Manufacturer:
      Model:
      Vturn 36/85
      Description:
      Genuine 45° slant bed for minimum distance from Z-axis ball screw to the tool tip. Z-axis ballscrew diameter 50mm. 91mm bar capacity. Box slideways with hardness HRC 55 for heavy cutting. Hydraulic 12″ chuck is offered as standard. 2-step gearbox ...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User